The tension on a Lazy Boy chair, you can set the tension on the underlying mechanism in order to best meet the individual size and strength. If it is difficult to push or pull back the lever to be included in a lying position is recommended to reduce tension. If you have a person bigger or heavier then you might want to increase the reclining mechanism of tension.
Chairs laziest guy have a pair of wing nuts or thumb wheels under the seat,You can adjust the tilt tension mechanism. First make sure that the rest of the leg is closed, and tilt the seat forward so that the tips of the arms and head back, allowing you to see under the chair.
Reclining rocking chair, glider chair and reclining chair Reclining-Way, you should see two cocks (one each side) toward the back of the sofa under the seat. Reclining Glider Swivel Chair-inch wheels instead of the two wing nuts, but can be setthe same way.
Profile Lazy Boy Classics lower leg and covered up with a mechanism to 3 points, you should see the two wing nuts (one per side) toward the center of the bridge under the seat.
It 'important to adjust both sides equally and make small adjustments (about a quarter turn) until you feel comfortable. To increase the tension lying position, turn the wing nut or wheel a quarter turn clockwise on both sides. To reduce the tension, turn thewing nuts or thumb wheels counter-clockwise one quarter turn on both sides. Return the chair to its upright position and test the new setting. Repeat the steps listed here if more adjustment is required.
Never tighten or loosen the adjustment wing nuts or thumb wheels all the way or you may damage the tension spring. The spring should not move on the bolt after making the adjustments. If it does, make sure you turn the wing nut or thumb wheel clockwise a minimum of one half turn after tightening it so the spring no longer moves. Nor should the spring be completely compressed after making your adjustments. If this occurs, loosen the wing nuts or thumb wheels a minimum of one half a turn counter-clockwise to avoid damaging the tension spring.
Remember to always adjust both wing nuts or thumb wheels equally.
No comments:
Post a Comment